Epoxyndo Art Lestari

sql
POLYAMIDE (04) 23.65 ARN - Hard Chemical Resistance | Catalog 42
POLYAMIDE (04) 23.65 ARN - Hard Chemical Resistance | Catalog 42
Hover to Zoom

20 Sep 2019
Indonesia
1 /Kgs
IDR 575.000

Specification of

DESCRIPTION

Polyamide (04) 23.65 ARN is a product made of 3 components: A, B, C which can be mixed and realized with hardener 23.65.

 

PREPARATION OF

METAL APPLICATIONS , NON METAL

Rust and oil must be cleaned with a brief blasting or chemical pre-treatment. After cleaning the steel & metals, continue to coat the top using Gray 41-6025 primary epoxy. ALUMINUM, GALVANIC STEEL

All oils, fats and dust must be cleaned by chemical treatment or using abrasive.

CONCRETE

Concrete structures or steel constructions that are intentionally hit with chemical spindling.

 

APPLICATION

Substrate temperature of at least 3 ° C. Before being applied, the painting area is cleaned with a cleaner.

Application equipment can use: Brush, Roll, Spray

 

SUGGESTED USE

Blast cleaning site steel is not possible, and where gloss retention is not very important. Can be used alone or combined with various primary systems and topcoats. Provides excellent corrosion protection in salt and fresh water.

 

SURFACE PREPARATION

Cleaning of electrical devices up to min. Free 2 mill scale (ISO 8501-1: 1998). Enhanced surface treatment will improve performance. When used over an old coating system, the surface must be clean and dry.

 

FUNCTION

1. As a connector and repair cracks on concrete surfaces, beams (of wood), holom and slab.

2. As a mixture layer for special construction.

3. As a patch hole / gap in the concrete.

4. If the plastering occurs concrete damage on reversal.

5. Repair silos made of concrete.

6. Concrete structures or steel constructions that are intentionally hit with chemical spindling.

7. This is waterproofing with high resistance from alkalis and acids.

8. Prevents rust on the iron.

 

DURING THE APPLICATION The

temperature of the substrate must be a minimum of 150C and a minimum of 100C above the dew point of the air around the substrate. When used in confined spaces, good ventilation is needed. Do not use hot air until the solvent has evaporated from the paint film to avoid surface drying and solvent traps.

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
phone Telepon
Request a Quote
Produk Siap di Pesan
Rp 0
1
Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot