menu

Epoxyndo Art Lestari

sql
Floor Coating EPOXYNDO (02) 28.08 ALD  POLYURETHANE FLOOR SELF LEVELING
Floor Coating EPOXYNDO (02) 28.08 ALD  POLYURETHANE FLOOR SELF LEVELING
Floor Coating EPOXYNDO (02) 28.08 ALD  POLYURETHANE FLOOR SELF LEVELING
Floor Coating EPOXYNDO (02) 28.08 ALD  POLYURETHANE FLOOR SELF LEVELING
Floor Coating EPOXYNDO (02) 28.08 ALD  POLYURETHANE FLOOR SELF LEVELING
Hover to Zoom

IDR 315000.00

Specification of

DESCRIPTION

Products that are widely used for floor painting. Is a strong binding and sticking tightly to concrete, wood, ceramics, or metal. Gives a glossy appearance with a high level of gloss, is physically hard and has excellent scratch resistance, strong in resisting heavy loads and is durable.

 

APPLICATION

Immediately after mixing in 1 minute the mixture spreads the layers on the floor primed to the required thickness using a four-leaf steel steel blade, or a safety pin / badge from the correct depth. Within 3 minutes of application, roll with a spiked roller. Place the mixing abutting in 3 minutes the application of the previous mixture. Max width of 5 m.

 

ADVANTAGES

- Binding strength in high concrete, floors with cementious surfaces, steel, metal and aluminum.

- Good chemical resistance

- Anti Electrostatic / static Firing

- Resistance to high humidity and water

- Emery resistance is high

- Meat, Fish and Poultry

- Cold room, chillers and fridge

- Food and beverage production, small foods

- Pharmaceutical production

 

FULL USE

These products are generally used for workplaces and factories such as: food processing plants, electrical plants and pharmaceuticals.

 

ADVANTAGES

- Good results

- Emery resistance is high

- Application is very simple

- Chemical resistance

 

MIXING

Component packaging is pre-weighed for maximum quantities. Never tear or pack proportions. Do not mix by hand. Basic commotion is a re-dispense wherever settlement. Adding hardener B to Basis A is a container and associates with a low-speed and spinning exercise such as a screw shape in the direction of 2 minutes, no concern for riding a train. Transfer to a large container and adding a C filler. loudly mixer type until uniform. Take care to take the air train. Rub the residual dirt from the previous mixture from the side of the drum, the discarded item before mixing the next package.

 

SURFACE PREPARATION

Heavy destruction attached attached or scarification. All residues must be moved in a dry, dust-free, textured open surface directed. Channel wall anchors / landing costs, minimum 4 mm wide / x 4 m deep, must be formed at the edge bays, columns, entrances / exits, channels and at the regular center to the other side of the floor.

 

SUBSTRATE MOVEMENT

All connection movements must be maintained Epoxyndo (02) 28.08 ALD and properly sealed.

The Construction Connection and the Eruption / Champion include but if a substrate movement occurs, Epoxyndo (02) 28.08 ALD will reflect the eruption / champion.

 

SUBSTRATE OF DISABLED / PERFECT PERFECT

Defects / imperfections must be corrected with Epoxyndo (02) 28.08 ALD scratching the coat.

 

SUBSTRATE REPAIR

Speed ​​at installation is important, levels, waterfalls and corrective work may be made using Polyurethane Mortar days before the top layer is over. Re-Priming such an area will be necessary. Where time is available, use mortar plaster mall polymer for thicknesses of more than 10 mm.

 

BASE PAINT

Apply an Epoxyndo (02) scratch coat 28.08.ALD and allow it to heal.

Epoxyndo (02) 28.08.ALD must be applied within 24 hours.

 

ATTENTION

Some of the components of this product may be full of risk mixing and application. Please consult relevant health & safety data sheets, available upon request. Where other products are expected to be used together with this material, relevant technical data sheets must be consulted to determine the total requirements.

Untuk keterangan lebih lanjut, silahkan download PDF ini :

phone Telepon
Request a Quote
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot